KIT INCLUDES THE FOLLOWING:

BWOODY SWAYBAR LINKS
BWOODY ADJUSTABLE PANHARD BAR
BWOODY UPPER CONTROL ARMS
BWOODY LOWER CONTROL ARMS

SWAY BAR LINKS: factory sway bar links are a weak 5/16 in diameter and the way the factory mounts the passenger link bids the rear sway bar with a 1" offset. We corrected the offset by moving our passenger link inside the oem bracket, and ours are a whopping 7/8 in diameter and custom energy suspension bushings we used to improve handling even more. Our sway bar links are nearly triple the size of the oem links!! The weakest link of the srt-8's suspension is the sway bar links due to the lack of diameter and lack of strength, significant improvements in handling were felt on the test vehicle (mrfreeze). Adding these to your vehicle will make your srt-8 jeep handle like it should!! Note: Requires the use of a non-washable synthetic grease (such as a marine grade or a never seize lubrication on the faces of the bushings for increased life of the bushings) Order below in the drop down box if you wish to upgrade the links with grease fittings installed.


NOTE: (EROPEAN AND AUSTRALIAN CUSTOMERS ONLY) Some European Spec models may not have the required "triangle" Plates required to make the Rear Sway bar links fit (please verify before ordering). You may have to purchase the following part numbers (Left side: 05290769AC, Right side: 05290768AC) from the dealership to convert your Jeep SRT-8 to the U.S. spec to make these fit.

ADJUSTABLE PANHARD BAR: BWoody Performance Has designed the first Double adjustable polyurethane bushing Panhard bar for the SRT-8 Jeep and now their ready to release the next improvement to your Jeep SRT-8 suspension our Rear panhard bar it's constructed of 1.312" chromoly .125 wall tube (.100" larger than OEM) it's also round not square like the OEM bar, which everyone in the racing industry knows round is always stronger than square. Its also adjustable +3 / -3". To finish up we then included polyurethane bushings and grease fittings for long bushing life.
Also the OEM Panhard bar weighs in at 7.9lbs ours weighs 7.1 lbs. making it over 3/4 lb. lighter than stock!!!!


ADJUSTABLE UPPER & LOWER CONTROL ARMS: BWoody Performance 2006-2010 Jeep SRT-8 Upgraded Rear Fully Two way Adjustable Lower Control Arms, Manufactured from .133" wall a36 steel, Chromoly Threaded inserts, Chromoly Adjuster and energy suspension polyurethane bushings these come in at 1.8 LBS lbs. lighter per side then OEM, so not only stronger but lighter too!!! Simply designed for one purpose in mind whether your tearing up laps at summit point or ripping up asphalt at your local drag strip too keep the rear tires planted. OEM lower control arms are weak rubber and we've been seeing many come in dry rotted and falling apart. Our test results have shown a consistent .07-.09 drop in 60 ft. times spraying a 100 shot of nitrous out of the hole. Grease fittings included.

*note: these control arms are rated up to 800hp for control arms rated higher please call*